TECHNICAL DESCRIPTION

• Manual bottle loading on the conveyor or into pucks of the RMC4. A chain provided of indexing motion handles bottles and pucks. The chain transfers bottles/pucks to the filling and capping stations.
• Glass and anodized aluminium accident protections.
• A stainless steel standard AISI 304 frame.
• Motorizing system and various group movements. Mechanical speed motor variator.
• Electronic controls to verify the presence of the bottle, the cap, and the eventual under-cap.
• Pneumatic gates positioned in proximity of the work areas to allow accesses and outputs of pucks/bottles under the working areas.
• Filling group consisting of 4/6 solid dispensers (according to the model) assembled on fitting clamps.
• Lobe supplier pump for liquids / creams with 3 inverter programmable speeds with variable acceleration and deceleration.
• A time management control panel for needle opening and their movement.
• Needle holder group of 4/6 needles that enter into the bottles during the filling operations.Needle movement group with a BRUSHLESS ENGINE with a 250MM RUN, with 4 programmable speeds (1 descent speed and 3 independent ascending speeds).
• Nr. 4/6 needles with pneumatic closure with clamp fittings (according to the models).
• Adjustable valve aperture at the end of each bottle.
• Conveyor transfer the bottles/pucks to the star-wheel capping area.
• Manual cap loading by an operator.
• Possibility of inserting an automatic supplier.
• Closure head with adjustable magnetic clutch for screw-caps. Alternatively it is possible to assemble a head seamer or a head for the pressure closure of the caps.
• PLC, steel electric panel,machinery with a touch screen control panel, possibility of memorizing up to 50 dosage programs.
• Bottle unload with a double system of pick and place for bottle extraction from the puck to the unloading conveyor.